Mansfield Genuine 160 Biscuit Tank

Genuine Mansfield 160 biscuit Alto toilet tank complete. This tank comes with all the parts. Tank includes the flush valve, fill valve, chrome trip lever, tank to bowl kit, and tank lid.  The tank, and tank lid are Genuine Mansfield parts made of the same glazed china as the bowl. It can also be found under the Mansfield product number 160014307. To install the tank you will first need to shut the water supply off, and disconnect the line from the fill valve. You will then need to loosen the 3 tank to bowl bolts, and lift the tank off of the bowl. After that you will need to make sure the new tank to bowl gasket is secured around the flush valve nut. The next step is to line up the holes in the tank with the holes in the bowl. Then you will need to set the 3 bolts through the holes, and secure them with the nuts provided. When tightening the bolts make sure to turn each of them one complete turn at a time. Never fully tighten one bolt. After this step is complete you will need to flush the stop out. You can do this by placing the end of the supply line into an empty bucket, and turning the water on at the valve. Allow the water to run through the line for just a few seconds. It is recommended to repeat this process at least 2 to 3 times before attaching the supply line to the new fill valve. Once you have flushed the stop out, connect the supply line, and turn the water on.